1 ftr-k1 series n features l 2 p ole, 5a l 2 form a l contact gap 1.5mm l sealed type available l high insulation in small package (between coil and contact) - insulation distance: min 8.0mm - dielectric strength: 5,000vac - surge strength: 10,000v l flammability ul94v-0 (plastics) l rohs compliant features cadmium-free contacts please see page 5 for more information actual marking does not carry the type name : "ftr" e.g.: ordering code: ftr-f4gak012t actual mar king: f4gak012t power relay 2 pole - 5a - 1.5mm contact gap ftr-f4g series n partnumber information ftr-f4g a k 012 t - kw [example] (a) (b) (c) (d) (e) (f ) (a) r elay type ftr -f4g : ftr -f4g-series (b) contact confguration a : 2 form a (c) coil type k : s tandard type (0.8w) (d) coil r ated voltage 012 : 3.....60 vdc coil r ating table at page 3 (e) cont act material / tv rating t : sil ver alloy / tv-3 rating (f) op tional type nil : flux fr ee type kw : plas tic sealed type
2 ftr-k1 series n specification item ftr-f4g fux free type ftr-f4g-kw plastic sealed type contact data confguration 2 form a material silver alloy resistance (initial) max. 100m at 1a, 6vdc contact rating 5a, 250vac (resistive) max. carrying current 5a max. switching current 5a max. switching voltage 400vac max. switching power 1,250va min. switching load (reference) 100 ma, 5vdc life mechanical min. 500 x 10 3 operations electrical (resistive) 5a, 250vac min. 100 x 10 3 operations 5a, 250vac min. 20 x 10 3 operations 250vac, 250w min. 100 x 10 3 operations 110vac, 250w min. 100 x 10 3 operations coil data rated power (at 20 c) approximately 0.8w operating temperature range -40 c to +70 c (no frost) timing data operate (at nominal voltage) max. 12ms (without bounce) release (at nominal voltage) max. 5ms (without bounce) insulation contact gap (initial) minimum 1.5mm resistance (initial) min. 1,000m at 500vdc dielectric strength open contacts 1,500vac, 1min. contacts sets 3,000vac, 1min. coil and contacts 5,000vac, 1min. surge strength coil to contacts 10,000v / 1.2 x 50s standard wave other vibration resistance misoperation 10 to 55hz double amplitude 1.5 mm endurance 10 to 55hz double amplitude 1.5 mm shock resistance misoperation min. 100m/s2 (11 1ms) endurance min. 1,000m/s2 (6 1ms) weight approximately 18 g ftr-f4g series
3 ftr-k1 series n coil rating type compliance contact rating ul ul 508 5a, 277vac, resistive tv-3, 125vac c22.2 no.14 (culus) tuv iec/EN61810-1 en60730-1 en60335-1 en60950-1 en60065 5a, 250vac (cos =1) 70c 3 / 51a, 250vac, 70c n safety standards coil code rated coil voltage (vdc) coil resistance +/- 10% (ohm) must operate voltage (vdc) * must release voltage (vdc) * rated power (w) 003 3 11.3 2.1 0.15 approx. 0.8 005 5 31 3.5 0.25 006 6 45 4.2 0.3 009 9 101 6.3 0.45 012 12 180 8.4 0.6 018 18 405 12.6 0.9 024 24 720 16.8 1.2 048 48 2,880 33.6 2.4 060 60 4,500 42.0 6.0 note: all values in the table are valid for 20c and zero contact current. 6shflhg rshudwh dohv duh dolg iru sovh dh rowdjh ftr-f4g series
4 ftr-k1 series n characteristic data ftr-f4g series n dimensions l dimensions l pc board mounting hole layout (bottom view) l schematics (bottom view) unit: mm
5 ftr-k1 series ftr-f4g series 1. general information l all signal and power relays produced by fujitsu components are compliant with rohs directive 2002/95ec including amendments. l cadmium as used in electrical contacts is exempted from the rohs directives on october 21st, 2005. (ame ndment to directive 2002/95/ec) l all of our signal and power relays are lead-free. please refer to lead-free status info for older date codes at : http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf l lead free solder plating on relay terminals is sn-3.0ag-0.5cu, unless otherwise specified. this mat erial has been verified to be compatible with pbsn assembly process. 2. recommended lead free solder profile l recommended solder sn-3.0ag-0.5cu. rohs compliance and lead free information 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. tin whiskers l dipped snagcu solder is known as presenting a low risk to tin whisker development. no considerable length whisk er was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: 3uhhdwlj pd[lpp soldering: dip within 5 sec. at vroghu edwk solder by soldering iron: soldering iron 7hpshudwuh pdlpp duration: maximum 3 sec.
6 ftr-k1 series fujitsu components international headquarter offces ftr-f4g series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/components europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ ?2011 fujitsu components europe b.v. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. the contents, data and information in this datasheet are provided by fujitsu component ltd. as a service only to its user and only for general information purposes. the use of the contents, data and information provided in this datasheet is at the users own risk. fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. fujitsu components europe b.v. and affliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. nor do fujitsu components europe b.v. and affliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ftness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. rev. april 15, 2011
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: fujitsu: ? ftr-f4gak005t-kw? ftr-f4gak012t-kw? ftr-f4gak024t-kw
|
